Appendix
USER’S MANUAL 66
6.2 Synchronized output
If you generate a waveform by software, there is a synchronized signal output from “SYNC”
terminal. The signal is square waveform, the frequency of which is equal to the waveform you
generated. For example, if you generated a 1 KHz, sine waveform, you will also generate an 1 KHz,
square waveform simultaneously.
The software setting is following figure.
Signal On: Open signal output
Sync: Open Synchronized output
The waveform on CH1 is the sine waveform you generated from the “OUTPUT” terminal, and that
on CH2 is the synchronized signal from “SYNC OUT” ports.
To Next Page
Loading...
