EasyManua.ls Logo

Hantek Tablet1000 Series - Count Parameters

Hantek Tablet1000 Series
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Measure
EN
Copyright © Qingdao Hantek Electronics Co., LTD Tablet1000 User manual
47
10.2.2 Count parameters
1. Positive pulse number: The number of positive pulses rising from below the lower
threshold to above the upper threshold.
2. Number of negative pulses: The number of negative pulses falling from above the
upper threshold to below the lower threshold.
3. Number of rising edges: The number of rising edges rising from below the lower
threshold to above the upper threshold.
4. Number of falling edges: The number of falling edges falling from above the upper
threshold to below the lower threshold.
5. Trigger count: The number of rising edges (or falling edges).
Note: The above measurements only apply to analog channels. The upper and
lower thresholds are 90% and 10% respectively.

Table of Contents

Other manuals for Hantek Tablet1000 Series

Related product manuals