Hantek Tablet1000 Series - Edit Arbitrary Waveform

Signal source
EN
Tablet1000 User manual Copyright © Qingdao Hantek Electronics Co., LTD
70
Note: You need to connect the signal source to another oscilloscope.
17.4 Edit arbitrary waveform
Double-click "WaveEditor_Setup_Tablet1000.exe" in the waveform editor folder in the
CD to go to arbitrary waveform editing window.
Figure 17.2 Arbitrary wave editor
Menu:
Import from a CSV file: Import the CSV file to the arbitrary waveform editor interface.
Export to a CSV file: Save waveform data to a CSV file.
Import from an ARB File: Import ARB file into the arbitrary waveform editor interface.
Export to an ARB file: Save waveform data to an ARB file.
Note: The device can call up ARB files saved in the USB flash drive, but CSV files cannot
be called up.
Toolbar buttons
:
Download waveform data to the device.
:
Smooth drawing mode. Use the left mouse button to draw waveforms of any shape.
:
Linear drawing mode. Click on the waveform to draw a straight line from the previous
point.
: