Save
EN
Tablet1000 User manual Copyright © Qingdao Hantek Electronics Co., LTD
60
13 Save
Click Utility > Save in the lower left corner of the screen to open the Save menu.
Oscilloscope pictures, binary (.lwf), reference (.ref), settings (.pho) and CSV can be
stored in internal memory of the machine or external storage device. The saved content
supports call-out. Select save reference data source (CH1-CH4), select the type you
want to save, and click Save at the bottom of the screen to save.
1. Picture
Save the display interface to file browse or external memory in .bmp format. Image files
support call-out.
2. Binary (waveform)
Save the oscilloscope waveform to the internal or external memory of the machine in the
format lwf. Binary files support call-out.
3. Settings
Save the oscilloscope settings to the internal or external memory of the machine in the
format. pho. Settings files support call-out.
4. Reference
Save the oscilloscope reference waveform to the internal or external memory of the
machine in the format .ref. Reference files support call-out.
5. CSV
Save oscilloscope waveform data to internal or external memory of the machine in the
format .csv. The storage file contains the waveform data of the display channel and the
main settings of the oscilloscope. CSV files cannot be exported.
The pictures and other contents saved in the machine can be found and opened in the
file browse under the main interface. Images can also be found and opened in the gallery
under the main interface.See the File browse and Gallery sections for details.
To Next Page
Loading...
