Hantek TO1254D - Appendix B: Warranty Summary

Appendix
EN
Tablet1000 User manual Copyright © Qingdao Hantek Electronics Co., LTD
84
Order information
Order number
1G Sa/S, 200MHz, 4-channel oscilloscope +
multimeter + signal source
TO1204AUTO
1G Sa/S, 250MHz, 4-channel oscilloscope +
multimeter + signal source
TO1254AUTO
Standard accessories
9V2A/5V3A/12V1.5A adapter
--
USB cable
--
Multimeter Pen *1 (only for TO1000C/D series)
--
Oscilloscope probe (one for two-channel series, two
for 4-channel series)
PP150B (110 MHz)
PP150B (150 MHz)
PP200 (200 MHz)
PP250 (250 MHz)
Crocodile clip (one for two-channel series, two for
four-channel series)
HT324
23.2 Appendix B: Warranty summary
Qingdao Hantek Electronics Co., LTD. (hereinafter referred to as Hantek) undertakes
that the host and accessories of its production shall be free from any material and
process defects during the warranty period.
During the warranty period, if the product is proved to be defective, Hantek will repair or
replace the product free of charge. Please refer to the description on Hantek official
website for detailed warranty regulations. For repair service or full warranty instructions,
please contact Hantek repair center or local offices.
Hantek disclaims warranties, express or implied, other than those provided in this
summary or any other applicable warranty card, including, but not limited to, any implied
warranties of merchantability and fitness for special purpose. In no event shall Hantek be