MS1000 Control System
Installation Guide
GD6063-1 Page 10 of 30
hanwell.com
The MS1000 wall mounted case contains a DIN rail onto which the MS Connector and
each MS1000 Output Card is snap-mounted (see Figure 5 Output Card Mounting and
Pins).
Figure 5 Output Card Mounting and Pins
Each standard MS1000 case can contain up to 8 Output Cards.
For larger systems either a larger MS1000 Control Unit, or multiple Control Units
connected together, can supply additional outputs. See Section 8.1 MS1000
Enclosure for case options.
Two card types/signal output are available for the MS1000 system, Analogue and Relay,
depending on which type of signal output is required:
MS1000-RM (8-bit) – (Relay).
MS1000-AM (12-bit) – (Analogue).
Both types of Output Card are added to the MS1000 Control Unit in the same way.
Analogue and Relay Output Cards can be combined in the same MS1000 Control Unit to
provide the necessary range of signal/output types.
To Next Page