HANYOUNG NUX TD510 Series - Page 22

Programmable Temperature & Humidity Controller
20
▶ Menu pane
▶ Individual control
Fig. 11) Stop screen of constant-value operation screen 1
(Individual control)
Fig. 13) Menu pane of constant-value operation screen 1
(Concurrent control)
Fig. 12) Operation screen of constant-value operation screen 1
(Individual control)
Fig. 14) Menu pane of constant-value operation screen 1
(Individual control)
①
②
③
No. Description
1
Auto tuning is enabled during constant-value control operation and run with current setting
values.
2
Press User-defined button to run assigned relay in
[Main menu] – [System menu] – [DO configuration].
3 Go to DI state check screen.