21
Installation
Before starting
Operation
Screen block
diagram
Function setting Program System setting Specifications
- Press Run button in the center left of stop screen of constant-value screen 2 in order to switch
to the constant-value operation screen 2 operation screen.
▶ Concurrent control
2) Constant-value operation 2 screen
②
⑩
⑦③ ④
⑫
⑯
⑰
⑬
①
⑥
⑤
⑪
⑧
⑭
⑨
⑮
Fig. 15) Stop screen of constant-value operation
Fig. 17) Stop screen of constant-value operation 2(Ch.2)
Fig. 16) Operation screen of constant-value operation 2(Ch.1)
Fig. 18) Operation screen of constant-value operation 2(Ch.2)
To Next Page
Loading...
