23
Installation
Before starting
Operation
Screen block
diagram
Function setting Program System setting Specifications
▶ Menu pane
▶ Common
3) Constant-value operation 3 screen (Graph view screen)
No. Description
1 Runs hidden menu pane. Click the same to hide menu pane.
2 Go to constant-value operation 1 screen.
3 Go to main menu screen.
4 Displays measurement, setting value, and output of current operation channel in a graph.
5 Set the data display with the check box. Graph is not displayed with OFF selected.
User can set background color(white/black), drawing(line and dot), and line thickness(1 or 2 pixels) of graph.
It can be changed in [Main menu] - [Operation setting] - [Graph].
※ Once the operation is started, the graph is being drawn accordingly. The flow of graph depends on the
save interval.
No. Description
1
Auto tuning is enabled during constant-value control operation and run with current setting values.
2
Press User-defined button to run assigned relay in
[Main menu] – [System menu] – [DO configuration].
3 Go to DI state check screen.
①
②
③
① ② ③
⑤
④
Fig. 23) Menu pane of constant-value operation 2 screen(Ch.1)
Fig. 25) Constant-value operation 3 screen
Fig. 24) Menu pane of constant-value operation 2 screen(Ch.2)
Fig. 26) Menu pane of constant-value operation 3 screen
To Next Page
Loading...
