25
Installation
Before starting
Operation
Screen block
diagram
Function setting Program System setting Specifications
▶ Concurrent control
1-2. Program operation screen
1) Program operation 1 screen
- Press Run button in the center left of stop screen of program operation screen 1 in order to switch to the
program operation 1 operation screen.
No. Description
1 Displays state of SD card.
2 Runs hidden menu pane. Click the same to hide menu pane.
3 Go to operation 2 screen.
4 Go to main menu screen.
5 Displays measurement(PV) of channel 1.
6 Displays unit of channel 1.
7 Displays heating control output(H.MV) of channel 1.
8 Displays cooling control output(C.MV) of channel 1. (For heating/cooling control)
9 Enter current setting value(NSV) for channel 1. (Displayed during operation only).
10 Displays ascending/descending/holding state of channel 1.
11 Displays tag name of channel 1 (which may be changed with operation setting).
12 Displays measurement(PV) of channel 2.
13 Displays unit of channel 2.
14 Displays heating control output(H.MV) of channel 2.
15 Displays cooling control output(C.MV) of channel 2. (For heating/cooling control)
16 Enter current setting value(NSV) for channel 2. (Displayed during operation only).
17 Displays ascending/descending/holding state of channel 2.
18 Displays tag name of channel 2 (which may be changed with operation setting).
19 Enter pattern No. for operation.
20 Enter seg No. for operation.
21 Run/stop button.
22
Displays general operation state messages.
23 Displays operation time.
② ⑩
⑦
③ ④
⑫
⑯
⑱
⑲
⑬
①
⑥
⑤
⑪
⑰
⑧
⑭
⑨
⑳
㉑
㉒ ㉓ ⑮
Fig. 27) Stop screen of program operation screen 1
(Concurrent control)
Fig. 28) Operation screen of program operation screen 1
(Concurrent control)
To Next Page
Loading...
