Programmable Temperature & Humidity Controller
34
●
Password input screen
1) Set data save interval.
2) Select data storage.
3) Select setting items to be sent to SD card.
4) Upload/download setting values.
▶ Save setting
Parameter Setting range Default
Save interval (Sampling time)
1-360 [sec]
2
Storage media Internal, SD, and All All
Item to send Pattern, Parameter, and All All
Download - -
Upload - -
[Function setting parameter]
●
Operation screen switch time setting
Switches operation screen for Ch.1 and Ch.2.
- Set "0" to switch time in order to disable the operation screen switch function.
- With the screen switch time setting, the operation screens of Ch.1 and Ch.2 are repetitively switched with
set interval and beep sound when the operation 2 screen is maintained for 1 min without any touch.
-
To cancel the screen switch operation, touch any part of screen. It only works with the operation 2 screen.
Fig. 48) Password input screen
Fig. 49) Save setting
①
③
④
②
To Next Page
Loading...
