HANYOUNG NUX TD510 Series - ON;OFF Signal Settings

Programmable Temperature & Humidity Controller
62
Parameter Setting range Default
Target setting None, Ch.1, and Ch.2 None
Range direction Within range and Out of range Within range
Type TSV, NSV, PV1, and PV2
TSV
Upper limit of operation range Channel EU (0 % - 100 %) 0.0
Lower limit of operation range Channel EU (0 % - 100 %) 0.0
Operation delay 0 - 9999 min 59 sec 0
4. Operation range
- Set upper and lower limits of operation range for target.
5. Operation delay
- Set operation delay for target.
1. Enter an inner signal name (using Korean, English, numeric, and symbol characters).
2. An inner signal name may include up to 24 characters (12 ones in Korean).
- Click the icon on upper left of alarm setting screen in order to go to the inner signal name setting screen.
▶ Inner signal name setting
Parameter Setting range Default
Inner signal name Korea, English, numeric, and symbol characters INNER_SINGALnn
Fig. 99) Inner signal name Fig. 100) Enter an inner signal name