HANYOUNG NUX TD510 Series - Page 75

73
Installation
Before starting
Operation
Screen block
diagram
Function setting Program System setting Specifications
- Screen to set relays and delay for 6 ON/OFF signals for individual channels.
- With ON conditions met, defined ON/OFF signal is ON after defined time, which is applied only for the first time.
- Screen to set relays for DI signals.
- If a DI signal is transmitted, defined relay is ON.
▶ ON/OFF signal
▶ DI signal
Parameter Setting range Default
Channel#n ON/OFF signal 0 ~ 32 0
Parameter Setting range Default
DI signal 1 - 32 0 - 32 0
[ON/OFF signal parameter]
[DI signal parameter]
Fig. 126) DO - ON/OFF
Fig. 127) DO - DI signal