Hardi HC 9600 User Manual

4 - System setup
126
• Rate Setup button
For more information, see “Rate Control Settings” on page 126.
Rate Control Settings
Adjust the Rate 1 and Rate 2 settings shown at the Product Control Toolbox on the Map screen, as well as import
application product prescriptions. To access the Rate Control Settings screen, press the Rate Setup button on
the Product Control Toolbox. The Rate Control Settings screen appears.
• Rate 1 and Rate 2
The Rate 1 and Rate 2 settings represent
preset application rates that allow operators
to quickly change between desired target
rates for each individual product.
Press to enter the desired amount.
• Increment
The Increment button allows operators to
specify the increase or decrease amounts for
a specified rate by using / on
the Product Control Toolbox.
Press to enter the desired increment.
• Prescription
To load a map-based prescription file, press
the Prescription button. For more
information, see “Loading Prescriptions” on page 129.
• Minimum Flow
Not relevant for HARDI® sprayers (Used for DirectCommand Liquid Applications only).
Rate Control Settings
Rate Control Containers
Rate 1 Rate 2 Increment Minimum Flow
Water (gal)

Hardi HC 9600 Specifications

General

Brand	Hardi
Model	HC 9600
Category	Controller
Language	English