EasyManua.ls Logo

Hardi HC 9600

Hardi HC 9600
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 - Fault finding
193
GPS Information
Receiver Tab
Receiver ID
Firmware Version
Product Serial Number (enclosure)
Internal Serial Number
TerraStar Unlocked
RTK Unlocked
Differential Tab
Active Estimated Error
Estimated error of the active differential
source.
Active Differential
Indicates the active differential source and
will vary depending on the current state of
StableLoc.
Selected Differential
Indicates the selected differential source (the
source selected in the GPS setup).
StableLoc Error Limit
Indicates the error limit selected in the GPS
setup.
Device Name
Indicates the connected Relay Module.
Software Version
Software version of the radio/modem within the Relay Module.
Manufacturer
Manufacturer of the Relay Module.
Serial Number
Serial number of the Relay Module.
Signal Strength
GNSS
Receiver
GPS Information
General Receiver Differential
Receiver ID:
Firmware Version:
Product Serial Number:
Internal Serial Number:
TerraStar Unlocked:
RTK Unlocked:
GNSS
Differential
NTRIP
Disconnect
GPS Information
General Receiver Differential
Active Estimated Error:
Active Differential:
Selected Differential:
StableLoc Error Limit:
Device Name:
Software Version:
Manufacturer:
Serial Number:
Signal Strength:
Mobile Directory Number:
Mobile Subscribe ID:
Relay CDMA
RTK Fixed
RTK Convergence:
Base Station

Table of Contents

Related product manuals