4 - System setup
130
Shape File Conversion
What is commonly called a shape file is actually a collection of three different files. All three of the files are required and must
be present on the USB drive for the system to use shape file groups for variable rate product application. A single "shape file"
can contain recommendation rates for multiple products.
To begin, press the button on the Product Control Toolbox.
The Rate Control Settings screen appears.
1. Press the button.
2. The Select File screen appears. Highlight your
desired .shp file and press .
Rate Control Settings
Rate Control Containers
Rate 1 Rate 2 Increment Minimum Flow
Water (gal)
Import Prescription: Selection File
Name
System Volume Information
Application RX.agsetup
Size Date Modified
To Next Page
Loading...
