4 - System setup
143
4. Press the Networking button.
5. On the Wireless Networking page, select the
iPad from the list. If the iPad isn’t available
from the list, try turning the personal
hotspot mode on the iPad off and then back
on.
6. At this point you will be prompted for the
password from step 2. Enter the password
and press the connect button.
7. The display is connected to the iPad.
Data Transfer
Import
Setup
Export
Setup
Export
Data
Export
Reports
Manual
Sync
Login Networking
Upgrade
Firmware
View
Files
Advanced
Options
Wireless Networking
Network Name (SSID)
My iPad
Access Point Mode
Status
Connected
My iPad
Status:
Signal Strength:
Security:
Connect
Not Connected
Excellent
WPA2
Password
To Next Page
Loading...
