5 - Operation
5.16
Work light selector switch
The boom and work lights selector switch is placed just below the
SafetyLo cker (between valve shield and EasyClean filter) and has three
positions:
1. Boom lights ON
2. L
ights OFF (neutral position)
3. Work light ON
It is recommended to switch OFF the rear lights of the tractor in order to
save power consumption and to avoid reflection.
ATTENTION! If preferred, the work lights can be controlled from the tractor cabin. Connect from J4 in the work lights
junction box to the optional function on the spray control unit.
Spray Technique - see separate book.
Optional extras - see separate books.
To Next Page
Loading...
Need help?
General
