6.1
6 - Maintenance
Lubrication
General info
Always store lubricants clean, dry and cool - preferably at a constant
temperature - to avoid contamination from dirt and condensed water.
Keep oil filling jugs, hoppers and grease guns clean, and clea
n the
lubricating points thoroughly before lubricating. Avoid skin contact with
oil products for longer periods.
Always follow the shown direction concerning recommended quantity.
If no recommended quantity is g
iven, feed lubricator till new grease
becomes visible.
Pictograms in lubrication & oiling plans tell the following:
1. Lubricant to be used (see “Recommended lubricants”).
2. Operating hours before
next lubrication.
ATTENTION! If the sprayer is cleaned with a high pressure cleaner, lubrication of the entire machine is recommended.
Recommended lubricants
Boom lubrication & oiling plan
BALL BEARINGS:
Universal Lithium grease, NLGI No. 2
SHELL RETINAX EP2
CASTROL LMX GREASE
SLIDE BEARINGS:
Lithium grease with
Molybdenumdisulphide or graphite
SHELL RETINAX HD 2 (or HDX 2)
OIL LUB. POINTS:
TOTAL Transmission TM
SAE 80W/90
Castrol EPX 80W/90
SHELL Spirax 80W/9
0
Mobil Mobilube 80W/90
To Next Page
Loading...
Need help?
General
