20 INSTALLATION AND CONNECTIONS20 INSTALLATION AND CONNECTIONS
INSTALLATION AND CONNECTIONS
This Switched AC Accessory Outlet ‡ is powered
only when the unit is on. This is recommended only
for devices that have a mechanical power switch that
may be left in the “ON” position.
NOTE: Many audio and video products go into a
Standby mode when they are used with switched out-
lets. This type of product may not operate properly
when used with the switched outlet.
The AVR 645 features a removable power cord
that allows wires to be run in advance to a complex
installation so that the unit itself need not be installed
until it is ready for connection. When all needed
connections have been made, connect the AC
power cord to the
AC Power Cord Jack ·.
The AVR 645 draws significantly more current than
other household devices, such as computers, that use
removable power cords. For that reason, it is important
that only the cord supplied with the unit (or a direct
replacement of identical capacity) be used.
Once the power cord is connected, you are almost
ready to enjoy the AVR 645’s incredible power
and fidelity!
HKP1445AVR645om 6/7/06 6:34 PM Page 20
AVR645
harman/kardon
To Next Page
Loading...
Need help?
General
