Hasselblad 503CW User Manual

75
1
3 4
5 6
2
Navigating the
CAMERA settings
MENU > SETTINGS > Camera
All Hasselblad V-system cameras can communicate with the CFV
without the need for extra cable connections except:
• Unmodied200seriesmodelsusingCFlensesinC-modeand
the FlexBody accessory.
View cameras (with the appropriate adapter and cables) can also
be used.
Proceed as follows:
1. Press the menu (MENU) button to open the menu.
2. Use  and  to select the SETTINGS sub-menu.
3. Press  to open the SETTINGS menu.
4. Press  to select the USER INTERFACE sub-menu.
5. Use  and  to select the required item.
Press either the
or button to make the new settings in
the case of Language, Power Down and Mark Overex or
press  again to access Sound, Date & Time and Display.
6. Press the EXIT button again to save the new settings and
close the menu.
Setting the options under the User Interface menu
Each of the above items can be set by similar menu navigation.
Language, Power Down and Mark Overex can be set immediately by
the or buttons while Sound, Date & Time and Display require
another move to sub menu for final choice.

Hasselblad 503CW Specifications

General

Camera Type	Medium format SLR
Exposure Modes	Manual
Focus	Manual focus
Lens Mount	Hasselblad V mount
Shutter Type	Focal-plane shutter
Flash Sync	1/90 sec
Metering	External metering required
Viewfinder	Interchangeable viewfinders (waist-level, prism)
Shutter Speed	1 sec to 1/500 sec, Bulb
Flash Sync Speed	1/90 sec