82
2
1
1
2
MENU > SETTINGS > Default
The DEFAULT setting will reset all custom settings you have made
back to the original default / factory settings.
To reset all settings:
1. Select MENU > SETTINGS > DEFAULT.
2. Press the OK button and then the EXIT to return.
Occasionally, Hasselblad releases updates to the internal software
(“firmware”) of the CFV. These updates may fix small errors and/or
add new features. If you need assistance from Hasselblad technical
support it facilitates the situation to know the serial number and
current firmware vision of the unit. To find this out:
1. Select MENU > SETTINGS > ABOUT. (See also Navigating
the Menu System or details about how to find this setting.)
2. Press to open the About dialog, which shows the serial
number and firmware version. When you are done reading
the information, press the menu (EXIT) button to return to
the SETTINGS menu. Either move on to another setting by
using the navigator button or press the menu (EXIT) button
again to exit the menu system.
MENU > SETTINGS > About
To Next Page
Loading...
