84
Tilt sensor (39/50 Mpix only)
The tilt sensor tags image files according to the orientation of the
camera at the time of capture to ensure correct orientation on the
display and in Phocus. There may be occasions when this is not
required – when the camera is pointing straight up or down, for
example – and so the tilt lock can be set at various degree settings.
1. Select MENU > SETTINGS > CUSTOM OPTIONS.
2. Press the button to reach: Tilt sensor:
3. Press either
or to choose between:
Auto or
Lock at 0 degrees, Lock at 90 degrees, Lock at 180
degrees and Lock at 270 degrees.
4. Press EXIT to save.
Copy to I-Bank (16/39 Mpix only)
Allows you to create new batches or add files to the last batch (on
an ImageBank-II).
1. Select MENU > SETTINGS > CUSTOM OPTIONS.
2. Press the button to reach: Copy to I-Bank:
3. Press either
or to choose between:
Entire card or
Active batch only
4. Press EXIT to save.
I-B Connection (16/39 Mpix only)
Allows you to create new batches or add files to the last batch (on
an ImageBank-II).
1. Select MENU > SETTINGS > CUSTOM OPTIONS.
2. Press the button to reach: I-B Connection:
3. Press either
or to choose between:
Create new batch or
Add to last batch
4. Press EXIT to save.
Square Crop icon as
it appears on the CFV
display.
Square Crop icon as it
appears in Phocus
To Next Page
Loading...
