Hatz 1B30E - Page 67

1B30E, 1B50E / 02 - Rev. 01 Maintenance
HATZ
67Manual
Step Activity Figure
4 Then blow it out with com-
pressed air.
5 Also clean the cooling ribs of
the cylinder head(3) and cylin-
der(4) and blow out with com-
pressed air.
6 Check the air gap(5) for dirt
and clean with compressed air
if necessary.
7 The element can be checked
and cleaned through the holes
in the contact guard.
8 Mount the recoil start(2)
again.