Extended Declaration of Incorporation
EC Machinery Directive 2006/42/EC
T
he manufacturer: Motorenfabrik Hatz GmbH & Co.KG
Ernst-Hatz-Straße 16
94099 Ruhstorf a. d. Rott (Germany)
he
reby declares that the incomplete machine: product description: Hatz diesel engine
Type designation and as of serial number:
1B20=10034; 1B20V=11124; 1B20R=14413
1B30=10129; 1B30V=11220; 1B30E=18204; 1B30VE=18303
1B40=11019;
1B50=12416; 1B50V/W=12616; 1B50E=18405; 1B50E=18805
s
atisfies the following basic safety and health protection requirements in acc. with Annex I to the
above-mentioned Directive.
-
Annex I, General principles no. 1
- No. 1.1.2., 1.1.3., 1.1.5., 1.2.1., 1.2.2., 1.2.3., 1.2.4.1., 1.2.4.2., 1.2.6, 1.3.1., 1.3.2., 1.3.3., 1.3.4.,
1.3.7., 1.3.9., 1.4.1., 1.5.1., 1.5.3., 1.5.8., 1.5.9., 1.5.10, 1.5.11, 1.6.1., 1.6.2., 1.6.4., 1.7.
A
ll relevant basic safety and health protection requirements down to the interfaces described
in the manual for diesel engine
in the enclosed data sheets
in the enclosed technical documents
have been complied with.
T
he following standards have been applied (fully or in part):
- EN 1679-1: 092011 - EN ISO 12100: 032011 - EN ISO 13857: 062008
- EN 60204-1: 062007
T
he manual for the diesel engine has been attached to that of the incomplete machine and the
Assembly Instructions have been provided to the customer electronically together with the order
confirmation.
T
he special technical documents in acc. with Annex VII B of the Directive 2006/42/EC have been
prepared. If necessary, I will submit the above-mentioned special technical documents in electronic
form to the competent authority.
T
he above-mentioned special technical documents can be requested from:
Wolfgang Krautloher, address, see manufacturer
C
ommissioning is prohibited until it has been established, where applicable, that the machine into
which the above-mentioned incomplete machine is to be incorporated, satisfies the provisions of the
Machinery Directive.
19/10/2021
Date Maximilian Eder Dr.-Ing. Simon Thierfelder
Series manager air-cooled engines Chief Technical Officer - CTO
To Next Page
Loading...
