Hatz 1B30E - Flash Code Table for Engine Faults

1B30E, 1B50E / 02 - Rev. 01 Faults
HATZ
81Manual
Unusual noises in the exhaust area
Possible causes Remedy Chapter
Model with diesel particulate filter:
Diesel particulate filter
is faulty.
Contact HATZ service.
Condensate emerges from the exhaust silencer
Possible causes Remedy Chapter
Operation under no
load or very low load
for an extended period.
Operate the machine at a load
of approx. 70% if possible until
the exhaust outlet is dry again.
9.2 Flash code table for engine faults
If an engine malfunction occurs, the indicator for "Engine malfunction" lights
up (see Explanation of symbols, chapter 5.2 HATZ instrument box, page 30).
If the engine is switched off and the starting key is set to "I", a flashing signal
is output on the engine control indicator. The table below shows possible
flashing signals, their meaning, as well as measures for remedies.
If the listed fault cases have been worked through but the fault continues to
persist, please contact your nearest HATZ Service.
The diagrams show the structure of a flash code using flash codes 2 and 3
as examples:
Flash code 2
Lamp ON
Lamp OFF
Flashing
signal
Flashing
signal
Flashing
signal
Pause Pause
Flash code 3
Lamp ON
Lamp OFF
Flashing
signal
Flashing
signal
Flashing
signal
Pause Pause