Hatz 1B30E - Changing the Fuel Filter

Maintenance 1B30E, 1B50E / 02 - Rev. 01
70
HATZ
Manual
Step Activity Figure
6 Tighten the hex nut(1) by ap-
prox. one turn.
7 Insert the exhaust manifold
with the bracket(2) into the
hole and pull it back to the out-
side so that the bracket can no
longer become unhooked.
2
8 Tighten the hex nut.
8.2.10 Changing the fuel filter
This chapter contains the following subchapters:
▪ Changing the fuel prefilter
▪ Changing the main fuel filter
Safety notes
DANGER
Fire hazard from fuel
Leaked or spilled fuel can ignite on hot engine parts and cause
serious burn injuries.
▪ Do not spill fuel.
▪ No open flames when working on the fuel system.
▪ Do not smoke.