1B30E, 1B50E / 02 - Rev. 01 Operation and use
HATZ
43Manual
Step Activity
4 As soon as the engine is running, release the starting key.
▪ The starting key springs back to position "I" and remains in
this position during operation.
▪ The oil pressure indicator(5) and charge control(6) must go
out.
▪ The operating indicator(7) lights up and signals that there is
no engine fault.
NOTICE
▪ In case of irregularities, switch off the engine immediately.
▪ Identify the fault and eliminate it.
▪ For details of troubleshooting, see chapter 9.1 Trou-
bleshooting, page 77.
7.4 Switching off the engine
Safety notes
CAUTION
Danger of injury from unauthorized access.
There is a danger of injury if unauthorized persons handle the
machine.
▪ Protect the starting key against unauthorized access during
breaks in operation or after completing work.
CAUTION
Protect the ignition lock against dirt and moisture.
▪ With the starting key pulled out, seal the ignition lock with
the protective cap.
To Next Page
Loading...
