Operation and use 1B30E, 1B50E / 02 - Rev. 01
40
HATZ
Manual
7.2 Performing tests
Before starting
Before starting the engine, several tests need to be performed to ensure the
machine is working properly.
Procedure
Step Test
1 The machine is standing securely and on a level surface.
2 The installation location is adequately ventilated.
3 There is a sufficient amount of fuel in the fuel tank (see chapter
7.6 Refueling, page 47).
4 There is a sufficient amount of engine oil in the engine housing
(see chapter 6.4 Filling engine oil (first filling), page 36).
5 No persons are located in the danger zone of the engine or ma-
chine.
6 All safety equipment is in place.
7.3 Starting the engine
If possible, separate the engine from the machine being driven by uncou-
pling it. Always switch the machine into idle mode.
Safety notes
DANGER
Danger to life from inhaling exhaust gases.
Toxic engine exhaust gases can lead to loss of consciousness,
and even death, in closed-off and poorly ventilated rooms.
▪ Never operate the machine in closed-off or poorly ventilated
rooms.
▪ Do not breathe in the exhaust gases.
CAUTION
Danger of engine damage from the use of starting fluid.
▪ Engine damage from the use of starting fluid can lead to un-
controlled ignition.
▪ Engine damage from uncontrolled ignition.
▪ Never use starting fluid.
To Next Page
Loading...
