Hatz 1B30E - Declaration of the Manufacturer

1B30E, 1B50E / 02 - Rev. 01 Declaration of the manufacturer
HATZ
93Manual
12 Declaration of the manufacturer
The following "Manufacturer's declaration of compliance with regulation (EU)
2016/1628" only applies to engines with an engine family designation in ac-
cordance with chapter 1.5 (see next page).
The corresponding engine family designation is noted on the engine type
plate (see chapter 4.2 Engine type plate, page 23).
CO
2
emissions*
Engine family
designation
CO
2
g/kWh
Test
cycle
Parent
engine
Speed
1B30E/1B50E-cs 1066.24 NRSC-D2 1B50E 3600
1B30E/1B50E-vs 918.00 NRSC-C1 1B50E 3600
1B50E-vs 914.46 NRSC-C1 1B50E 3600
*According to EU Regulation 2016/1628, Article 43 Paragraph(4)