1B30E, 1B50E / 02 - Rev. 01 Transport, installation and commissioning
HATZ
37Manual
Overview
1 Dipstick
2 Oil refilling container
Procedure
Step Activity
1 Unscrew the dipstick(1) and clean it.
2 Fill engine oil. For the specification and viscosity, see chapter
4.3 Engine oil, page 24. See chapter 4.1 Engine information and
filling quantities, page 21 for the engine oil capacity.
3 Reinsert the dipstick and screw it tight.
4 Unscrew the dipstick and check the oil level.
5 If required, add engine oil to the max. mark.
6 Reinsert the dipstick and screw it tight.
6.5 Venting the fuel system
Requirements
The fuel system must be bled in the following situations:
▪ At first filling of the fuel tank
▪ After changing the fuel filter
▪ Engine shuts down due to empty fuel tank
To Next Page
Loading...
