1B30E, 1B50E / 02 - Rev. 01 Operation and use
HATZ
45Manual
Procedure
Step Activity
1 Turn the starting key to position "0".
The engine switches off.
All indicator lamps go out.
Note:
The engine continues running for several seconds after it is
switched off. Before performing any further activities, wait until
all moving components have come to a complete standstill.
2 Remove the starting key.
3 Close the ignition lock with the protective cap (only for standard
instrument box).
NOTICE
Danger of exhaustive battery discharge.
▪ When the machine is switched off, always turn the starting
key to position "0" or else the battery may become fully dis-
charged.
7.5 Check the oil level
Safety notes
CAUTION
Danger of burns.
There is a danger of burns when working on a hot engine.
▪ Wear safety gloves.
CAUTION
Danger of injury
Prolonged contact with engine oil can lead to irritation of the
skin.
▪ Wear safety gloves.
▪ If there is contact with the skin, thoroughly wash the af-
fected areas of the skin with soap and water.
To Next Page
Loading...
