Hatz 1B30E - Check the Screw Connections; Clean the Exhaust Screen

Maintenance 1B30E, 1B50E / 02 - Rev. 01
68
HATZ
Manual
Step Activity Figure
Moist or oily contamination
1 Contact HATZ service.
8.2.8 Check the screw connections
Safety note
NOTICE
i
▪ Do not retighten the screws for attaching the cylinder head.
▪ Only retighten loose screw connections.
Screw connections can be secured with thread locking ad-
hesive or tightened to a defined torque. Retightening tight
screw connections can cause damage.
Procedure
Step Activity
1 Check the condition of all screw connections and ensure that
they are tight (for exceptions, see note).
2 Tighten any lose screw connections.
8.2.9 Clean the exhaust screen
Safety notes
CAUTION
Danger of burns.
There is a danger of burns when working on a hot engine.
▪ Let the engine cool before maintenance.
CAUTION
Danger of injury
There is a danger of injury when performing cleaning work at the
exhaust screen.
▪ Wear safety gloves.