8.4.7 Key Sound setting
After entering “Key sound” setting interface, select “ON” or “OFF”, then press OK key to save and
exit.
8.4.8 Forget Operate Alarm Setting
After entering “Forget Op” setting interface, select “ON” or “OFF”. When the setting is on: in ‘stop’
status, the reminder alarm shall sound when no operation on keypad in 2 minutes.
8.4.9 “Almost Done” alarm setting
After entering “Almost Done” setting interface, select “ON” or “OFF”. If the setting is “ON” and with
preset VTBI, “Almost Done” alarm should sound 3 minutes before VTBI is complete.
8.4.10 Infusion Log Setting
After entering “Infusion Log” setting interface, press OK to upload/view logs. Infusion pump could
store about 65000 pieces history records, including turn on/off, start, stop and alarms during operation.
When AC power failure or power off, the records could still be saved. When records are full, the new
record will overwrite the old one. The records won’t be lost even the device without power. The content of
the records can not be modified.
Select “Upload log‟, all infusion records can be viewed on computer (only available when connect the
pump to computer by USB interface). Select “View log”, the pump can directly display the latest
infusion/alarm information. Press RETURN key, the pump shall return to “parameter setting interface”.
(1) Upload log: upload infusion records to computer with USB interface. Please refer to steps as
follows:
a. Open the super terminal (if there is no, please open the computer Main menu - Program - Annex -
Communication - Super terminal, establish the super terminal named 115200 on the desktop. Click
disconnect icon to disconnect terminal connection. In the file menu, select "properties", set the COM port
(according to actual USB interface)
b. In 115200 property box, click on the “configuration”. Set the baud rate as 115200, date flow
controls as Xon/Xoff.
c. After the setting, click call icon , connect the terminal.
d. In the super terminal interface, select the “transfer - capture text”. Establish a txt file named after a
To Next Page
Loading...
