14 Hayes Modem Installation Guide
Possible Jumper Settings
To determine the manual settings for your modem, follow the
instructions below, depending on what your modem looks like. Every
modem has a cylindrical on-board speaker (also known as a
squawker) located on it.
If your modem’s on-board speaker is located on the bottom
righthand corner (next to the bracket), you need to remove the
jumper from the JP2 jumper and place it on JP1 for both the COM
port and the IRQ settings.
The example below illustrates specific jumper positions for both the
COM port and the IRQ. At the bottom is a sample of how your
jumper setting may appear after setting both the COM port and the
IRQ.
To Next Page
Loading...
Need help?
General
