24 Hayes Modem Installation Guide
Using DOS
Applications with
Windows 95/98
With Windows 95/98, when you first try to run a DOS application
that requires your internal modem (such as some interactive
games), your computer may have trouble locating it. When you are
using Windows 95/98 applications, the computer locates the modem
automatically. DOS applications need to be told your modem’s
address.
You can enter a DOS mode three different ways with Windows
95/98. Because the directions vary, please read the steps carefully.
• Shutting down to DOS
• Opening a DOS window
• Using F4 or F8 to open DOS.
To Next Page
Loading...