Installing an External Modem 35
Setting Up Your
Communications Software
Please refer to your communications software manual for specific
details about your software.
For Windows users: Start the communications software and open
the menu that contains the modem configuration. Select the COM
port that the modem is configured for.
- or -
For DOS users: Start the communications software and open the
menu that contains the modem configuration. Select the COM port
and IRQ that the modem is configured for.
- or -
For Mac users: Start the communications software and open the
menu that contains the modem configuration. Select the
phone/modem port with the specific common software use.
To Next Page
Loading...