HBM DMP41 - Page 74

Configuration
Configuring measurement channels in setting mode
74 A03470_07_E00_00 HBM: public DMP41
7.2.6 Copying (Copy)
You can use the “Copy” function to transfer the settings of one channel to
other channels. This obviates the need for time-consuming setting work.
► Press more....
► Press Copy.
► Select the channel whose settings are to act as the source channel
(Master channel) (here: Channel1) (A).
► Select the channels whose settings should be overwritten with those of
the Master channel (B).
► Confirm with Copy (C).
The channel names can also be overwritten with the name of the Master
channel (C).
Example: Channels 2, 3, 4 and 6 are renamed as Channel1.
A
B
C
C
Copies all the settings from channel 1
to channels 2, 3, 4 and 6.