Safety instructions
PAD4002A A4243-1.0 HBM: public 5
S The device must not be modified from the design or
safety engineering point of view except with our ex
press agreement. In particular, any repair or soldering
work on motherboards (exchanging components) is
prohibited.
S The device is delivered from the factory with a fixed
hardware and software configuration. Changes can
only be made within the possibilities listed in the cor
responding documentation.
S The device is maintenance free.
S Please note the following points when cleaning the
housing:
- Disconnect the device from all current and voltage
supplies before cleaning it.
- Clean the housing with a soft, slightly damp cloth.
Never use solvent, as this could damage the label
or the housing.
- When cleaning, ensure that no liquid gets into the
device or connections.
S In accordance with national and local environmental
protection and material recovery and recycling regula
tions, old equipment that can no longer be used must
be disposed of separately and not with normal house
hold garbage, see Chapter9 on page31.
Qualified personnel
Qualified persons means persons entrusted with the in
stallation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function.
This includes people who meet at least one of the three
following requirements:
To Next Page
Loading...
