WE2111
A3983-1.0 en/de/fr 13
5 Mounting optional modules
Note
A module must not be connected or removed if power is
present, otherwise the WE2111 may be destroyed.
Disconnect or switch off the voltage supply before
installation/removal.
This section describes the connection of the modules for
analog or digital inputs/outputs and the interface
modules.
The connection of the power pack module is described in
Section 7.2 on Page 21.
Important
You can only connect one of the modules WE2111-ZS or
WE2111-ZCC and only one of the modules WE2111-R2
or WE2111-R4.
A total of two modules (with power pack module) can be
connected.
To Next Page
Loading...
