WE2111
8 A3983-1.0 en/de/fr
2 Markings used
2.1 Symbols on the device
FCC certification
This mark enables the manufacturer to guarantee that
the product complies with the requirements of the FCC
(Federal Communications Commission, USA).
CE certification
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the
relevant EC directives (the Declaration of Conformity can
be found on the HBM website (www.hbm.com) under
HBMdoc).
Statutory waste disposal mark
In accordance with national and local environmental
protection and material recovery and recycling
regulations, old devices that can no longer be used must
be disposed of separately and not with normal household
garbage. Also see Section 11 on Page 34.
2.2 The markings used in this document
Important instructions for your safety are specifically
identified. It is essential to follow these instructions in
order to prevent accidents and damage to property.
To Next Page
Loading...
