Heatmiser Slimline-E V3 - Page 15

• Use the Up/Down keys to enter the required WAKE time ......................
• Press H to conrm settings .........................................................................................
• Use the Up/Down keys to enter the required WAKE temperature .......
• Press H to conrm settings .........................................................................................
• You will now see “LEAVE” displayed on screen.
• Repeat the programming steps for each period until complete.
• For unused periods enter --.-- and the thermostat will ignore the setting.
• Press A to conrm settings and return to main display ....................................
Note: In 7 Day programming mode you can repeat for each day independently.
In Weekday/Weekend programming mode you will see Sat Sun displayed on
screen and can repeat for the weekend. To change the programming mode
please refer to pages 23-24.
Model: Slimline-E V3
14