Document 80-23024 Issue 3r1 HEBER
CONTENTS
1 INTRODUCTION ........................................................................................ 1
1.1 MANUAL VERSIONS AND REVISIONS – ........................................................................ 1
2 MULTISYSTEM BOARD CHECKS ..................................................................... 2
2.1 SYNC ON GREEN (SOG) AND/OR MULTISYNC CRT MONITORS / PVM / BVM / ARCADE ................... 5
2.2 HDMI ISOLATION - ........................................................................................ 6
3 ASSEMBLY PREP ....................................................................................... 7
3.1 RECOMMENDED TOOLS ..................................................................................... 7
4 FITTING THE DE10-NANO ......................................................................... 11
5 BEFORE FITTING INTO THE 3D PRINTED ENCLOSURE. ....................................... 17
5.1 RGB SCART AND VGA - ................................................................................. 17
5.2 CONNECT THE USB AND ETHERNET CABLES – .............................................................. 18
6 3D PRINTED ENCLOSURE PREPARATION ........................................................ 19
7 FITTING INTO THE 3D PRINTED ENCLOSURE ................................................... 24
7.1 USING THE INTERNAL RGB SCART CONNECTOR - ......................................................... 34
7.2 RGB SCART OUTPUT - .................................................................................. 37
7.3 FITTING SCART AND AN SSD / HDD INTERNALLY – ....................................................... 39
8 USING THE MULTISYSTEM ......................................................................... 48
8.1 BEFORE YOU POWER ON - ................................................................................ 48
8.2 SNAC PORT .............................................................................................. 49
8.3 FUTURE EXPANSION ...................................................................................... 52
9 GENERAL WARNINGS FOR OPERATION .......................................................... 53
9.1 FAQ ..................................................................................................... 53
9.1.1 Why does the SCART output not work with my ‘TV’ / Monitor / Arcade?................. 53
9.1.2 Sync issues with LCD / Plasma / OLED / multisync / trisync / BVM / PVM CRT .......... 54
9.1.3 Audio sound output is not working? ............................................................ 55
9.1.4 Why is there a slot on the SD card mount? .................................................... 56
9.1.5 Why was the enclosure design changed from the original version into V5.x? ............ 57
9.2 GENERAL FEEDBACK AND CONTACT US ..................................................................... 57
10 TECHNICAL REFERENCE ........................................................................... 58
10.1 3D PRINTED ENCLOSURE – ................................................................................ 58
10.2 MULTISYSTEM PCB BOARD REFERENCE - .................................................................. 58
10.3 MULTISYSTEM KEY COMPONENTS AND FUNCTION - ......................................................... 59
10.4 EXPANSION PORT CONNECTIONS – ......................................................................... 59
To Next Page
Loading...