58
80-23024 Issue 3r1 HEBER
10 TECHNICAL REFERENCE
This section is provided for technical reference and to assist with your own developments of the
MiSTer Multisystem or if you have a question / support request.
10.1 3D Printed Enclosure –
Files for the 3D printed enclosure can be found on the Prusa Printers website –
https://www.prusaprinters.org/prints/75605-mister-multisystem-classic-gaming-console-3d-
print/files
10.2 Multisystem PCB board reference -
The Multisystem PCB – key component references and Pin1 indication etc.–
To Next Page
Loading...