Preset Plus Feeder
confidential
C.1.14
Aligning the active pile
In ”Manual” mode, the pile (main pile or auxiliary pile)
can be aligned with the buttons (Fig. 13/3) and
(Fig. 13/6). These buttons do not have any function
in ”Automatic” mode. The pile is aligned by the pile
control system.
Pile to D.S.
(Fig. 13/3)
The active pile moves to D.S.
Pile to O.S.
(Fig. 13/6)
The active pile moves to O.S.
To Next Page
Loading...
