30
3.2. Advanced Options
To change the detailed configuration, In the ‘Layout’ tab shown, Please click
“Advanced…” shown on the bottom of the ‘Layout’ tab of the ‘Preferences’
.
Reset Default Values: Reset to default.
Color Correction: You can correct gamma for colors. You need to use
CardPrinterConfig to adjust color densities.
- Main [-100:100] : Correct gamma for all panels
- Yellow [-100:100] : Correct gamma for yellow panel
- Magenta [-100:100] : Correct gamma for magenta panel
- Cyan [-100:100] : Correct gamma for cyan panel
- Black [-100:100] : Correct gamma for black panel
- Overlay [-100:100] : Correct gamma for overlay panel
Position Processing: Set criteria for resin black processing.
- Color [-32:32]: to set the position of color panels
- Mono [-32:32]: to set the position of resin or mono panel
- Overlay [-32:32]: to set the position of overlay panel
Resin Black(K) Processing: Set criteria for resin black processing.
- Text [0:100]: to set density criteria for extracting black objects
- Dot [0:100]: to set density criteria for extracting black dots
- Threshold [0:100]: to set density criteria on dithering
- Dithering Degree [0:100]: to set sharpness on dithering
- Resin Extraction: You can set the method to extract resin black when you use
design programs. It will be set automatically.
To Next Page
Loading...