36
4. Utilities
4.1. Card Printer Config
CP55 is produced with optimized setting. You need to adjust setting value if required or
spare parts are replaced using CardPrinterConfig in our Installation CD.
You can adjust following settings with CardPrinterConfig.
(1) Run CardPrinterConfig
Password input window is displayed when
you run this program. If you input the
correct password, the recorded setup value
will be shown and you can change values.
The password is saved to CP55 printer. So
if you use another PC with same printer,
previous password is required to run this
program. (Default password is none.
Please press OK if you have not set
password.)
Figure 53 CardPrinterConfig Log-in
When you are successful to log-in, you can
set values shown as left picture.
Figure 54 CardPrinterConfig start