Heidi CP55 - Figure 100 Printing Quality Trouble 3; Figure 101 Printing Quality Trouble 4; Figure 102 Printing Quality Trouble 5

72
6.5.3. Unclear or not uniform print.
 Uneven or bad card surface.
Change the card.
 Too high or low setting of the color density.
Please contact the local supplier. The color
density default of your printer needs to be
changed.
 The printer head is contaminated with the
dust and dirt.
Clean the printer head with cleaning kit.
6.5.4. Not aligned color print.
 Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-
80 card (54mm x 86mm).
 Uneven or bad card surface.
Change the card.
 The transfer roller or printing roller is
contaminated with the dust and dirt.
Clean the rollers with the cleaning kit as section 5.2.
 Worn-out printer.
Please contact the local supplier.
6.5.5. Unplanned color print.
 Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80
card (54mm x 86mm).
 Uneven or bad card surface.
Change the card.
 The transfer roller or printing roller is
contaminated with the dust and dirt.
Clean the rollers with the cleaning kit as section 5.2.
 Worn-out printer.
Please contact the local supplier.
Figure 100 Printing quality trouble 3
Figure 101 Printing quality trouble 4
Figure 102 Printing quality trouble 5