100
(4) Take apart bolts which fastened lift cylinders and the inner mast. Hang up the inner
mast without losing shims of the piston rod heads carefully.
(5) Take apart bolts which jointed lift cylinders and the bottom of outer mast and take
apart the oil-pipe between two lift cylinders without loosing the nipple.
(6) Lay down the inner mast and remove the main roller at the bottom of the inner mast.
(7) When the main rollers on the upper outer mast will come out from the inner mast top
end, then the main roller can be removed.
(8) Replacing main rollers
a) Take apart the upper main rollers without losing shims.
b) Fit the new main roller and shims together on the outer mast.
(9) Hang up the inner masts and let all rollers in the inner mast.
(10) Assembly the lift cylinder and the fork carrier as disassembly contrarily.
To Next Page
Loading...
Need help?
General
