30
Display the current battery electric quantity. The current electric quantity is displayed at
the top of the battery icon.
(4) Travelling mode
Display the current working mode, there are "P", "E", "S" three levels.
(5) Steering wheel Angle indicator
Represents the direction of the steering wheel.
(6) Steering angle indicator
The arrow represents the direction of the steering wheel.
(7) Travelling speed
Display the current vehicle speed, the unit is km/h.
(8) Fault code display
It shows the current fault code of the truck.
(9) LED lights
When operating mode is in S mode, the turtle speed light is on;
When the direction switch is in the middle position, the neutral light is on;
When the battery electric quantity is less than or equal to 20%, the low power
indicator turns on;
When the power is less than or equal to 10%, the lifting lock indicator turns on;
When the driver leaves the seat, the seat indicator turns on;
When the parking brake switch closes, the parking brake indicator turns on.
4.2.2 ZAPI GRAPHIC SMART instrument
4.2.2.1 General description
(1) It is a color screen instrument connected to the truck system through CAN bus. The
color screen instrument can display the travelling state of the truck and has the diagnostic
function.
(2) The instrument can read or modify the Settings of all the control modules connected
To Next Page
Loading...
Need help?
General
